Sunday, December 22, 2013

Niner + Knard = NiKnard

Yesterday was unseasonably warm but very rainy, which made it a good day to spend some time in the garage with my help, building up my 29+ project. I tried fitting the Knard on my existing rear rim (a 23.5mm wide IRD Clyde), where it measured 65mm wide at the casing. It actually had enough clearance to turn, but it rubbed slightly at the chainstay where my wheel was a bit off center and out of true.




Finally, it was interesting that it could fit, but there was not enough clearance for it work. The wheel configuration I ended up with was:

Front: Knard on Velocity Blunt 35 (I measured this as a 68mm casing width)
Rear: Vee Rubber Mission 2.4 on Blunt 35 (57mm casing width)

For reference:

Knard on IRD Clyde rim: 65mm (so the extra 11.5mm of the Velocity rim only netted me 3mm of tire width)
Mission on IRD Clyde: 54mm (-3mm for the 11.5mm narrower rim)

Overall, I was a little disappointed that the wider wheels had such little impact on the tire width. On the other hand, this justifies to me my savings not to go with the Rabbit Hole wheelset, which might have only gained me another 3mm or so of width, at a cost of over $250.

I assembled what I hope will be a simple, reliable, fun bike:

Friction shifted 11-34 eight speed drivetrain will always shift well:

I was impressed during my build to discover this detail:

The small cable guide on the right hand chainstay is slotted--this allows you to easily remove the shifter to the derailer assembly without cutting any cables, making it easy to switch from a geared drivetrain to single speed. Kudos to Niner for this simple but thoughtful detail!

There's still quite a bit of room up front with my 465mm long Fargo V2 fork:

which has me wondering if I should further deplete my bike fund and try a 455mm OS Blackbuck "mama bear" fork--that would sharpen up the front steering, while still clearing the Knard... in theory.

Unfortunately, the flip side of our warm weather has been to melt all the snow on the trail. With the rain over the weekend, there's probably not a rideable trail in the state. Instead of a real test ride, the kids and I got out in the 58 degree weather and rode around the paved trail at the park.

The creek behind our house was running high

This soaked the trails around the creek, but that didn't stop us (or even slow the kids down):



Since the kids were already dirty, there was no reason not to stop at the Avery Park playground:


Probably our last outdoor playground for the year, so it was nice to get out and enjoy this weather while we had it.

6 comments:

  1. I have the same Sir9 frame in Medium. I am fairly certain the Niner carbon fork I have on mine has the clearance you need.
    https://www.dropbox.com/sc/1nqtoog59a2yp0d/bcCCWWILRY

    ReplyDelete
  2. Good work. Planning on doing the same on my medium Kermit. I tried a Krampus & loved it but love the ride from my Niner.

    ReplyDelete
    Replies
    1. Paul, I need to do some real riding on it, but I'd say go ahead and try a Knard, even with whatever your current wheels are. If nothing else, it's fun to look down and see that massive tire in front!

      Delete
  3. Cool. Good to see that I can try out giant tires without first buying super wide rims! Thanks for bringing the Blackbuck forks to my attention in another post, too. Kona P2 is all I've really considered, but the length and offset of the Blackbuck look like a better match to my Bontrager, if I were to rigid up the front end and go to a Dirt Wizard tire.

    ReplyDelete
    Replies
    1. Hi Philip,

      A fellow on mtbr.com recently tried a Knard on a Dually (45mm) rim, and it just barely cleared the 455mm Blackbuck fork. My latest focus is see if I can get a gen 2 Singular Gryphon fork: it's been redesigned to fit a Knard, and it's just 445mm with 55mm offset.

      Delete
  4. I just rode a Retrotec around the block today that had tubeless Knards on polished Duallies. Pretty sweet. The Knards might be bigger than I need...

    ReplyDelete

New Bike: my $100* Jones LWB**! (2012 Specialized Expedition)

 * The frame was $100 on ebay. I probably could have found a complete bike locally for not much more if I wanted to be patient, but this cam...